Categories: HARDWARE
Code
OATEY-PTFE-THREAD-SEAL-237MLBrand
OateyType
GeneralQuantity
Oatey Pipe Thread Sealant with PTFE is a professional-grade joint-sealing compound designed to seal and lubricate tapered threaded pipe connections. Its PTFE-enhanced paste fills small spaces between male and female threads, helping prevent leakage caused by internal pressure.
The non-hardening formula permits tighter assembly with lower torque and allows threaded fittings to be dismantled later without stripping or damaging the threads. It is suitable for compatible plastic and metal piping systems carrying water, steam, compressed air, brine, dilute acids and selected industrial liquids or gases. Oatey official product information
| Detail | Information |
|---|---|
| Brand | Oatey |
| Product type | Pipe thread sealant / pipe joint compound |
| Formulation | Paste sealant containing PTFE |
| Colour | White |
| Capacity | 237 ml / 8 fl oz / ½ pint |
| Packaging | Brush-top plastic container |
| Suitable threads | Plastic and metal threaded pipes |
| Certification shown | NSF/ANSI 61 |
| VOC status | Low-VOC compliant |
| Recommended internal SKU | OATEY-PTFE-THREAD-SEAL-237ML |
Oatey Pipe Thread Sealant with PTFE for Plastic & Metal Pipes – White, 237 ml
Seals and lubricates threaded pipe joints
PTFE-enhanced formulation
Helps create leak-resistant threaded connections
Suitable for compatible plastic and metal threads
Non-hardening and non-separating paste
Permits tighter assembly using lower torque
Allows easier future disassembly
Low-odour and low-VOC formulation
Suitable for hot and cold-water piping
Brush applicator for accurate application
NSF/ANSI 61 certification shown for drinking-water system components
Suitable for residential, commercial and industrial plumbing
https://buildinn.co.in/product/oatey-pipe-thread-sealant-with-ptfe-white-237ml
| Specification | Value |
|---|---|
| Net contents | 237 ml / 8 fl oz |
| Appearance | White paste |
| Sealant type | Soft-set, non-hardening thread compound |
| Pressure rating—liquids | Up to 10,000 PSI |
| Liquid temperature range | –46°C to 260°C |
| Pressure rating—gases | Up to 3,000 PSI |
| Gas temperature range | –46°C to 204°C |
| Dry time up to 125 PSI | Normally no waiting time |
| Dry time above 125 PSI | Approximately 4 hours |
| Maximum VOC level | Approximately 3 g/L |
| Typical shelf life | Approximately 2 years from manufacture |
| Certification | NSF/ANSI/CAN 61 |
| Application tool | In-lid brush |
Pressure and temperature ratings are based on Oatey’s Great White technical specification and must be checked against the actual piping material, transported medium and local plumbing regulations.
Shut down and depressurise the piping system.
Clean the male and female threads completely.
Remove rust, grease, dirt, scale and old sealant.
Stir the sealant thoroughly before application.
Apply an even coating to the male threads using the supplied brush.
Fill the thread roots without excessively covering the first thread.
Assemble and tighten the joint according to the fitting manufacturer’s instructions.
Remove excess sealant from outside the connection.
Follow the required waiting period before pressure testing.
₹4,999.00
₹1,799.00
₹499.00 ₹599.00
₹449.00 ₹699.00
₹1,999.00
₹2,999.00
